Results 1 to 6 of 6
  1. #1
    Prospect
    Join Date
    Jul 2018
    City
    Washington Twp
    State
    New Jersey
    Posts
    7

    Fairing pod threaded insert

    I need one of the fairing pod hex inserts that the pod bolts into. Bolt came out great but will not thread in ive tried everything. Of course by looking at parts schematic you can only get the insert with the pod assembly. Does anybody have an old pod laying around I can buy an insert and pay to ship? Or let me know where I might be able to buy one. Some will say just leave it out the other two bolts will hold fine but Im a perfectionist and have to fix it right. Thanks

  2. #2
    Senior Member yegg's Avatar
    Join Date
    Sep 2015
    City
    Front Royal
    State
    Virginia
    Posts
    218

    Fairing pod threaded insert

    Is this what you are looking for? These worked well for me.

    Batwing Windshield Fairing Replacement Brass Insert Repair Kit with Installation Tool. compatible with Harley-Davidson HDsmallPARTS #HDS-10BI-T2R https://www.amazon.com/dp/B01J6514K4...ing=UTF8&psc=1

    Or are you looking for the mounting hardware that attaches the speaker pod to the fairing?

    Sent from my iPhone using Tapatalk
    Ride Safe,

    Elliott
    2015 FLHXS - Amber Whiskey

  3. #3
    Prospect
    Join Date
    Jul 2018
    City
    Washington Twp
    State
    New Jersey
    Posts
    7
    Its the threaded insert that screws into the pod. It screws into the pod with a hex key then has a tapped hole internally for your 7/16 bolt. Theres 3 on each pod.

  4. #4
    Senior Member yegg's Avatar
    Join Date
    Sep 2015
    City
    Front Royal
    State
    Virginia
    Posts
    218
    Donít know the thread size of what I have but Iíll check


    Sent from my iPhone using Tapatalk
    Ride Safe,

    Elliott
    2015 FLHXS - Amber Whiskey

  5. #5
    Prospect
    Join Date
    Jul 2018
    City
    Washington Twp
    State
    New Jersey
    Posts
    7
    HD confirmed insert only available as part of the whole enclosure. Took a tap/chaser to it and was able to clean it out enough to get bolt to thread properly. All is good. Thank you all for suggestions!

  6. #6
    Senior Member yegg's Avatar
    Join Date
    Sep 2015
    City
    Front Royal
    State
    Virginia
    Posts
    218
    Glad to hear. Thanks for the update.


    Sent from my iPhone using Tapatalk
    Ride Safe,

    Elliott
    2015 FLHXS - Amber Whiskey

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •