Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Nov 2018
    City
    Mississauga
    State
    N/A
    Posts
    60

    Factory passing lamp kit. 69818-06

    Can anybody tell me what crimp to use
    For Terminal Socket #20-16AWG
    Part # 73191-96

    https://goo.gl/images/37LMHA

    and 4 way housing 73154-96Bk
    I want to do it correctly but not spend a fortune on the tool if possible.
    Any suggestions on a resonable tool?


    Sent from my SM-G930W8 using Tapatalk
    Last edited by Jordan1200; 01-18-2019 at 09:01 PM.

  2. #2
    Member
    Join Date
    Sep 2018
    City
    Metro-Denver
    State
    Colorado
    Posts
    29
    I have passing lights on my FLSS and not on my FLHXS. I just used a pair of needle nose pliers to do mine. I took my time to make sure each connector/connection was tight with no play or damage. I was tested how well I did when I was putting "fangs" on my FLSS and the passing light assembly dropped and everything was suspended by the wires. I was mad at myself that maybe now one of the wires was damaged. But I checked the lights and everything was fine, I went back to look at the wires and they were still in great shape, no damage. So it is possible to crimp with a pair of pliers.... of course YMMV....
    2018 HD FLHXS (SGS)
    2017 HD FLSS (Softail Slim S) Olive Denim
    2017 BMW R1200 GSA

  3. #3
    Member
    Join Date
    Nov 2018
    City
    Mississauga
    State
    N/A
    Posts
    60
    Installed along with the crashbar fog lights

    Sent from my SM-G930W8 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •