Results 1 to 6 of 6
  1. #1
    Prospect
    Join Date
    Mar 2019
    City
    Hyattsville
    State
    Maryland
    Posts
    14

    Deutsch HDT-48-00 Crimp tool

    I need to attach the Deutsch Crimps on to the wiring harness for the detachable luggage rack light kit I bought.

    pVMHwgvzTF6n+FPjIvXGWA.jpg

    Is this the tool to make that crimp?

    s-l1600.jpg

    Thanks for your input.

  2. #2
    I donít think you need a crimp tool for those.


    Sent from my iPhone using Tapatalk

  3. #3
    I just use pliers.


    Sent from my iPhone using Tapatalk

  4. #4
    Member Dutchman17's Avatar
    Join Date
    Mar 2017
    City
    Cincinnati
    State
    Ohio
    Posts
    47
    The Harley part number is
    HD-42879 IMG_1159.jpgIMG_1160.jpg. I have attached photos. There is also a Packard Terminal Crimper part number HD-38125-7. I found both in my 2015 Electrical Diagnostic Manual HD-99497-15 I found both in section A on pages 25-27. Iím sure that you could check the manual for your year. Section A of the Electrical Diagnostic Manual covers the different tools and pins used on the connectors.


    15 SGS Amber Whiskey; ThunderMax tuner; Ceramic True Duel headers; 4.5 inch RC Exhaust slip ons ;LED turn signals/ run lights; passenger backrest; one inch passenger and rider floorboard extensions;stage one air cleaner. 4 point docking system; air wing.




    Sent from my iPhone using Tapatalk Pro
    2015 SGS; Stage 1;
    1inch Floorboard and passenger extensions;
    Cycle Solutions Ceramic True Dual Head-pipes;
    ThunderMax Tuner;
    4.5 inch RC Exhaust slip-on mufflers;
    LED rear tail lights; LED front turn signals/ running lights

  5. #5
    Member Dutchman17's Avatar
    Join Date
    Mar 2017
    City
    Cincinnati
    State
    Ohio
    Posts
    47
    I probably didnít answer your question regarding the crimping tool. I canít find any additional information in the on line catalog for parts and accessories talking about special tools needed. It does look like the correct tool for the air wing lighting kit that I was able to find not sure if itís what you have. Hope this helps. Personally I would prefer to crimp wires used in connectors especially if you have to remove them later.


    15 SGS Amber Whiskey; ThunderMax tuner; Ceramic True Duel headers; 4.5 inch RC Exhaust slip ons ;LED turn signals/ run lights; passenger backrest; one inch passenger and rider floorboard extensions;stage one air cleaner. 4 point docking system; air wing.




    Sent from my iPhone using Tapatalk Pro
    2015 SGS; Stage 1;
    1inch Floorboard and passenger extensions;
    Cycle Solutions Ceramic True Dual Head-pipes;
    ThunderMax Tuner;
    4.5 inch RC Exhaust slip-on mufflers;
    LED rear tail lights; LED front turn signals/ running lights

  6. #6
    Prospect
    Join Date
    Mar 2019
    City
    Hyattsville
    State
    Maryland
    Posts
    14
    Thanks for your reply. This was helpful.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •