I noticed the other day that when I lean and turn left or right there seems to be a rough feeling in the front end, almost feels like a slight grinding. I don't feel anything when going straight down the road and nothing seems loose. Brakes are fine and wheel seems straight and tire is fine.
Rough feeling when turning
- Thread starter jimmy1wheel
- Start date
Could be wheel bearing(s), or possibly the gooseneck bearings (triple tree). You say it feels ok in a strait line, so I assume that going over bumps doesn’t raise concern? If the gooseneck has a problem you might notice it over bumps. The lateral stress in corners will highlight wheel bearing issues. The first thing I’d examine would be wheel bearings.
Last edited:
Check front wheel bearings..... I had mine go out a year ago around 25,000 miles. We were on trip down south and made it to a dealer for repair. These are ball bearings, and if you read and check on this, they don't seem to last long. I bought bearing puller/installer from Pit Posse and rear bearings for mine. I plan to change bearings every other tire change. You don't want to do what I did and run 70 mph down the highway and have one let go!!!
I just had this same issue after closer inspection turned out to be front tire issue similar to cupping 12k miles on stock tires
I think I may have caused this issue by not paying closer attention to tire pressure
So I just replaced both tires with new Dunlops Vibration Issue in turns gone
I think I may have caused this issue by not paying closer attention to tire pressure
So I just replaced both tires with new Dunlops Vibration Issue in turns gone
