Amp issues

[Bluebowtie]

My amp decided to stop working. Arc Audio XDI 600.4. I have checked continuity on the fuses. They are good. I checked all power wires with a multi meter and get 12 v. Is there anything else I should check before I call it fried and buy a new one?


Sent from my iPhone using Tapatalk

 

[TomA]

Had to replace my amp last month Arc moto 600.4. Mine would play then cut out and a minute later play again. Replaced it with a new one, I guess it's the price we pay for quality sound.

 

[Spazz]

Can you wee the power LED lit up on the amp? If not... check your remote wire to ensure you have power to switch the amp on from the remote wire when the bike is in ON or ACC mode. You may have a blown fuse on the remote wire circuit

 

[Bluebowtie]

Can you wee the power LED lit up on the amp? If not... check your remote wire to ensure you have power to switch the amp on from the remote wire when the bike is in ON or ACC mode. You may have a blown fuse on the remote wire circuit

I did that and had 12v.


Sent from my iPhone using Tapatalk

 

[Spazz]

I did that and had 12v.


Sent from my iPhone using Tapatalk

Then call it in...

Sent from my SM-G975U using Tapatalk