bar swap woes

[jimjames2uk]

hi morning guys have a massive problem with my street glide st swapped the bars over to 12 la choppers one the wire pulled pretty easily but now i have no functions on left clutch side at the switch have checked continuity of wire and also voltage at can bus pins at connector all are fine but when plugged in nothing .if you swap plugs over A TO B then everything work but then nothing or right hand side works .Have checked fuses and switch works fine when swapped to other plug .have voltage at pins continuity of wires am i missing something as im now scratching my head as to why it dosent work

 

[Signal_Hack]

Have you checked continuity of all wires to each other and all wires to the bars?

 

[jimjames2uk]

yes the left side bars only have the four wires running to them red white white black black green and red all are good also checked the voltage at the can bus pins there pretty much the same as the right side pins only thing i can think of and someone esle had similar issue after doing a through seach is that the left side dosent like solder joints as he had same issue right side was ok left side didnt like them so have ordered a longer set of lead so i dont have to have extensions or solder joints in will let you know how i get on