2014 street glide problem

[2014sg]

New to forum and having problems with my bike.

I have a 2014 street glide that I just finished up installing my wild 1 bars. All wiring was plug and play from harley plugged everything back up and I no longer have gauges or Hand controls. And help would be very appreciated.

Thanks

 

[Bluebowtie]

Double check your connections


Sent from the mobile leash

 

[Gunner]

Check fuse

 

[2014sg]

Fuses have been checked and all my connections are good.

 

[Gunner]

I guess the next step would be to pull all connections and check pins.

 

[hulkss]

Did you pull the main fuse before doing the work?

 

[2014sg]

Main fuse was not pulled. What problem would that create?

 

[hulkss]

If you did not disconnect power you may have zapped the CAN Bus signal wires. I'm not an expert but there may be a safety that now needs to be reset. Try disconnecting power for a few minutes and then reconnect. There is a procedure in the owners manual for pulling the fuse so the alarm system does not get triggered.

 

[2014sg]

I don't have security on mine. Any other suggestions? I'm thinking it's the ecm because I got it to start at first and it was running super rich with an engine code, I then killed it and was looking for a connector that may have been unplugged and found nothing went to start the bike again and I got nothing.

 

[hulkss]

Did you try disconnecting power to reset the computers?

 

[2014sg]

I disconnected the battery for about 2 min and it didn't change anything.

 

[Gunner]

Is the bike stock or does it have a fuel program installed ?

 

[2014sg]

Yes bike is stock no programer.

 

[chaderick]

There is a 20 amp fuse under the black cover beside your main fuse. You cannot see it when you remove the side cover, you have to putt the square cover away from it. I did the same thing, pulled the bike apart 5 times until I started looking for fuses, let me know if you need a photo. Remove side cover, then remove fuse box cover and you will see the mini fuses

 

[chaderick]

 

[2014sg]

Thanks to Chaderick the problem has been solved. Thanks everyone for the input. I really appreciate it guys.

 

[Gunner]

Glad to hear that.

 

[chaderick]

I'm happy to hear it. I'm here to help anytime, just hit me up

 

[Spazz]

Thanks to Chaderick the problem has been solved. Thanks everyone for the input. I really appreciate it guys.

So... just to recap... what did you find wrong? Which fuse was blown?

Could help out someone in the future...

 

[chaderick]

same one I popped on my install, you all remember how much trouble I had. Glad I was able to help on this one