Kill Switch and FP3

[Erilflynn]

For purposes of turning the bike on and off during the initial/map lookup/flashing/auto tune/etc. can the kill switch just be left on or off? Or do you follow the same procedure per Harley i.e. on = ignition (ACC), kill switch and off = kill switch, ignition (or in this case ACC). In the V&H videos he seemed to just go to the ACC position and never the kill switch. Thanks for your patience.

 

[Mojo]

I did it with the ignition switch not the kill switch.

 

[Erilflynn]

I did it with the ignition switch not the kill switch.

With the kill switch on or off? Seems to me you could just leave it on during the entire process. Will find out soon hopefully...

 

[liquid1]

I’ve never used the kill switch just the ignition switched tuned FP3 the same

 

[Erilflynn]

Thank you gentlemen.