Need Help! New Bars-Will Not Start!

[DurtyDan]

Need Help:
Just installed 12" Yaffe bars on my 2017 Street Glide. Dealer ran the wiring through the bars for me. When I hooked everything back up and turned the bike to ignition my running lights come on and my fuel pump kicks on whether the kill switch is engaged or not. Infotainment never turns on, no gauges register, and no blinkers work. All fuses are good, and I disconnected my battery and ECM while working. Any suggestions? Thanks in advance

DD

 

[TomA]

Sounds to me like you need to check all your plug ins and make sure they are all the way plugged in.

 

[14POSE]

Check the connections to the back of the controls on the bars then the wiring harnesss connections. Is is possible that somehow the wrong plug got plugged into the wrong connector with the 17's?

 

[JMeadows]

Sounds to me like the dealer might have got the wires mixed up when he rehooked the Deutsch connectors after putting them thru the bars.