Toggle sidebar

What did you do to, or on your streetglide today?

Supporting our Sponsors
Called Craig up at Clearview Shields in Colorado today and ordered a fresh windshield for the 2017. I have really enjoyed the anit-buffeting this nice thick shield a afforded me on rides the past 3 years. Its a good quality part and I can say its among the best out there:
Small-15 5/8 height
Smoke
Recurve
And right now 20% off! for Christmas.
 
Added HD heated grips as the dealership was running a free install deal. It was 11 degrees riding over there....not fun
 
Man I'd sure love heated grips... Even at 40 degrees my fingers are cold and stiff by the time I get to work. It's just harder for me to justify because I'd only use them for maybe 3 months a year, and only in the mornings.

Maybe I just need better gloves.

Saturday I rode some random back roads for 200 miles. I intended to buy a new helmet but after not finding one I liked in my size, I decided to replace all the lining and shield in mine. It'll be a new helmet, minus the new helmet price!

Sent from my Droid Turbo 2 using Tapatalk.
 
I was wearing some heavy duty gloves but was still cold as hell after 30 minutes. It's worth it...the settings go up to 6 and this is how that breaks down: 1 - warm, 2 - sweaty hands, 3 - needs to be 0 degrees or less, 4-6 is like holding on to a hot iron! They're well worth it
 
Took a short Christmas Eve ride in the cold (35 miles). My Olympia gloves were rated to handle temps as low as 40*, but temp today was 34* and the tips of my fingers were starting to tingle. That told me it was time to head in and shut it down. I still had a great time out there though.
 
Big blue sky and light traffic so I rode it to work this morning. It had been about a month I think since my last ride!
 
Drilled out my cat, chucked the factory mufflers, installed a set of Cobra NH 4.5" "Neighbor Haters" loaded a new map from the FP3 and went for a very fun ride ;0) Probably should have run it first without the new map to see if I could notice the difference but me being the lazy sort I am, I opted to just "get her done" instead. I had already replace the factory AC with a Kuryakyn Velociraptor AC. The total difference in power that came from the de-cat and add-ons and bone stock is impressive. The Cobras are awesome sounding pipes and at between $340 and $380 are well worth every penny and they do have an optional "quiet pack" baffles that you can install if you neighbors are not quite so understanding as mine.
 
Last edited:
Got my new tires installed. So far it's an improvement, didn't slip on the painted crosswalks or grab at cracks in the road. I always forget what it's like to have round tires! The bike drops into corners much easier now.

Now to see if these will last as long. 21k on the original tires was a surprise to me, and I'm Hoping for a repeat

Sent from my Droid Turbo 2 using Tapatalk.
 
Started Off 2017 the right way, with more parts for the SGS! :cool:
Parts Ordered List:
KST 14'' Mayhem Bagger Bars (blk)
Namz Wiring Extensions
Namz TBW
Black Pearl Color Brake & Clutch Lines
"Off Road Use" LED's From Fuel Moto
Dirtyworks Dirty Air DIY Rear Air Ride Kit (no tank)
J&M Hidden Antenna
eBay 4 Point Dock (blk)
eBay Mid Frame Air Deflectors (blk)
Custom Fairing mounted Gopro mount
Drag Specialties Slotted wide blade brake Levers (blk)
HD Diamond Black Hand Grips 56746-08 (might return these to get some Arlen Ness ones)
A new Phone Mount from Slipgrip (since i will be losing my Note 7 soon) ****ing Samsung, im so pissed, i would like to take Tannerite and a .223 to every Samsung product i own.
Protective sleeving from amazon for the dirtyair air lines and wires.

Not to bad, and i would like to say i think i got a heck of a deal from easternperformance.com for the KST bars and namz extensions, If anyone else is interested.
 
16FLHXS said:
Started Off 2017 the right way, with more parts for the SGS! :cool:
Parts Ordered List:
KST 14'' Mayhem Bagger Bars (blk)
Namz Wiring Extensions
Namz TBW
Black Pearl Color Brake & Clutch Lines
"Off Road Use" LED's From Fuel Moto
Dirtyworks Dirty Air DIY Rear Air Ride Kit (no tank)
J&M Hidden Antenna
eBay 4 Point Dock (blk)
eBay Mid Frame Air Deflectors (blk)
Custom Fairing mounted Gopro mount
Drag Specialties Slotted wide blade brake Levers (blk)
HD Diamond Black Hand Grips 56746-08 (might return these to get some Arlen Ness ones)
A new Phone Mount from Slipgrip (since i will be losing my Note 7 soon) ****ing Samsung, im so pissed, i would like to take Tannerite and a .223 to every Samsung product i own.
Protective sleeving from amazon for the dirtyair air lines and wires.

Not to bad, and i would like to say i think i got a heck of a deal from easternperformance.com for the KST bars and namz extensions, If anyone else is interested.
Click to expand...

Will you please post pics of your custom Go Pro fairing mount? Thanks
 
37744e8885a93f185130df30e17a07cd.jpg
8bb5c8cee88992ab5fa6a288dac390db.jpg
c39dc797a55f277bff909e02c4d3b298.jpg

Finished full bar install LATwinPeaks. HD edge cut grips ,levers,mirrors and sux lighting.. HID bulbs on the way. Very pleased I did all the work myself. Had a HD Sales manager tell me the job was quality.. did I want some work? ... told him sure... let's talk


Sent from my iPhone using Tapatalk
 
What did you do to, or on your streetglide today?

0e19d5864be9bc55d476c819c1d5e962.jpg

Well I did this a month or so ago but here's the bike with the ultra conversion installed. Haven't had a chance to ride since the but I'm sure I will be happy with the set up. Thanks again Mojo

Sent from my iPhone using Tapatalk
 
Last edited:
You must log in or register to reply here.


Latest posts

Forum statistics

Threads
7,969
Messages
69,207
Members
15,052
Latest member
Emurillo89

Share this page

Share this page
Top Bottom
Back